Tree Gear

Spiderjack 2.1

NEW! the 2.1 version has a longer lever with a fairlead.

With some practice the Spiderjack 2.1 allows for unique functions and movements resulting in a very dynamic as well as strength saving climbing technique.

Features and Functions

• Use with ropes according to EN 1891, 11-13 mm.Ready for use with just one carabiner
• Attachment of the Spiderjack to the harness and securing the termination requires only one carabiner. This makes your whole climbing system very compact, plus the hand-over-hand movement becomes really efficient.
• Extremely smooth rope passage even when under load.
  As soon as you pull the line above the device the Spiderjack turns from locking into running position. This allows for two-handed as well as single-handed ascent or adjusting of work positioning even when there is little rope weight below to speed up the rope run. Self-tending at it's best!
• Ergonomic release combined with line control
  The ergonomically designed release lever of the Spiderjack features a groove on its inner side giving a redirection of rope. This way the climber‘s hands will not be affected by rope friction at all.
• Thumb brake allows for precise control of movement
  Some practice with the unique thumb brake will facilitate a very precise control of rope passage – from extremely slow to extremely fast. Trained experts really enjoy the Spiderjack induced high-speed precision landings. Of course the brake system works just as well in „normal“ use. The brake pad is made of Guajak wood (guaiacum), a very hard wood, friction resistant and extremely durable.

NOTE

• Using the Spiderjack requires wearing a harness with a low attachment point. The lower the Spiderjack is attached, the longer are the arm pull movements.
• The Spiderjack has no panic-function! Therefore it is necessary to follow user instructions especially in the learning phase!

Check out this video below where Joe Harris demonstrates the Spiderjack's ease of self-tending and friction control. It's a must see!