Tree Gear

TEUFELBERGER multiANCHOR

Another product from TEUFELBERGER's Rope Tool series, designed for use in various anchoring scenarios. Thus, multiANCHOR can be used as trunk anchor, on the one hand, while it constitutes an excellent addition to conventional cambium savers, on the other. When installed as trunk anchor, multiANCHOR's main benefit is that it enables a ground-based and lowerable ascent system. Therefore, if a rescue becomes necessary, the injured or incapacitated person can be lowered by a rescuer standing on the ground.

An anchor construction installed up in the tree can be configured in two possible ways:

a) As Y anchor on 2 limbs, the anchor point centering itself via the ring. Here, in the case of potential unreliable anchor points, the load is applied to 2 limbs;

b) As Y anchor with 2 redundantly secured anchor points. This configuration guarantees the safety of a second anchor point in the event that a limb breaks.

For putting together the above systems, the following extra items are needed:

Trunk anchor – Sirius Loop

Compensating anchor – ringLOOP 26

Redundant anchor – 2 x ringLOOP 34, 1 x ringLOOP 26

TEUFELBERGER's multiANCHOR is certified to EN 795 B and is ANSI Z133.1-2006 compliant.

Colour: White/Green

Diameter: 10mm

Tensile Force: 2200/5000 daN/lbs